Jinan Jinli Hydraulic Machinery Co., Ltd. is one of the largest professional manufacturers of hydraulic lifts in China. It is a member of China Lifting, Transportation and Warehousing Logistics Association and a unit of “Contract-honoring and Promise-keeping”.
The hydraulic lifting platform is widely used in interior and exterior decoration, workshops, stations, shops, halls, street lamps, logistics loading and unloading, industrial assembly lines, highways and other industries. It has been developed for a number of national key units such as aerospace, nuclear power, airports and military units. Grouped equipment.
The hydraulic lift realizes the lifting function through the pressure transmission of the hydraulic oil. Its shearing fork mechanical structure makes the lift hoist has high stability, the large working platform and the high carrying capacity, which makes the working range of the aerial work larger. And suitable for multiple people working at the same time. It makes aerial work more efficient and safer.
What is the high-speed downshift of the hydraulic lift during the operation? Let's briefly introduce:
There are two concepts of high-speed gear reduction: one is the high-speed gear reduction with the goal of reducing the speed of the landing gear and pulling the frame. There is also a high-speed downshift that is based on the speed of the vehicle and the instantaneous enhancement of the proposed engine power, also called the oil tank.
The monopoly of high-speed gear reduction requires the driver to reduce the lower gear to a lower gear when the proposed engine is more powerful. This shifting technique should be considered complicated in a switching monopoly. It is mainly applied to the treatment of snow and ice roads, wet roads, slopes, brake failures, and sudden speed increase when overtaking.
In the operation, what should be paid attention to when the hydraulic lift is downshifted at high speed? We Jinli summarize the following:
First, when grabbing
1 The right foot closes the oil, the left foot quickly presses the clutch pedal, and the right hand picks the shift lever to the neutral position (the three are matched with the difference).
2 The left foot quickly lifted the clutch pedal, and the right foot of the big throttle slammed a foot "empty oil".
3 The left foot again quickly presses the clutch pedal, and the right hand copies the shift lever into the lower gear.
4 The left foot gradually lifts the clutch pedal, and the right foot does not follow the oil, which is achieved by monopoly.
Note: The grab monopoly is suitable for the inability to slow down when the brake pedal is depressed, but the clutch pedal cannot be lifted too much to prevent skidding on the snow and wet.
Second, even when the oil block
1Press the left pedal on the clutch pedal to the “half-link” position (do not just step on it).
2 The right foot receives 70% of the oil (not purely oil).
3 The right hand will shift the shift lever from the first gear to the lower gear. (Stabilize: the oil monopoly is suitable for instantaneous sudden speed increase, and the gear is faster after the gear is lowered to prevent back seat).
4 The left foot lifts the clutch pedal quickly, while the right foot is quickly followed by oil, which is achieved by monopoly.
Do you know now?
More problems and solutions, all in Jinan Jinli Hydraulic Machinery Co., Ltd., sincerely thank the new and old customers at home and abroad for their trust and support over the years. We sincerely welcome colleagues from all walks of life to come to the factory for inspection, cooperation and negotiation, and seek common development. (http://)
