Structural Features of NYP Stainless Steel Inner Ring High Viscosity Pump

NYP stainless steel inner ring high viscosity pump The internal gear drive gear (outer rotor) drives the inner rotor to rotate in the same direction within the fully enclosed pump body. The crescent plate of the pump body and the front cover separate the suction inlet and the discharge outlet. Negative pressure is formed at the suction port during rotation, the liquid is sucked in, the liquid is taken to the discharge port by the rotor, and the liquid is discharged under pressure to complete the liquid delivery. NYP stainless steel inner ring high viscosity pump is mainly composed of inner and outer rotor, shaft, pump body, front cover, bracket, seal, bearing and so on. Seal mechanical seal and packing seal in two forms, for high temperature, high viscosity and corrosive media, the choice of packing seal (special requirements, optional magnetic drive, zero leakage structure). When conveying the easily-crystallized material, a thermal insulation jacket can be designed on the pump body of the front cover and the gear pump, and the steam is melted while working. Pump can be equipped with safety valve, when the gear pump or pipe system overpressure, the safety valve opens, the formation of internal reflux, to ensure system safety. The gear pump stainless steel, can deliver corrosive liquids. Gear pump device from the pump, motor and base composition. There are two ways of transmission bridge and direct connection. From the motor end to the pump, clockwise rotation. Right into the out. Pump should pay attention to the following points: 1, medium lubrication, cleanliness, corrosive. 2, medium viscosity, temperature. 3, medium inlet and outlet pressure, installation height. 4, the use of explosion-proof requirements of the occasion. 5, the installation environment, horizontal or vertical, fixed or mobile, connecting the special requirements of the pipeline.