NYP high viscosity pump details

NYP High Viscosity Pump Precautions: NYP High Viscosity Pump is filled with liquid to be delivered to the rotor pump housing before starting operation for safe start-up. If the ambient temperature is below the freezing point, preheat the pump with heat steam beforehand and then start the gear pump. The direction of rotation of high-viscosity pump with inlet and outlet port line. If the rotor pump is operated for the first time or used for a long time after it is idle, it is best to run for about one hour at no-load or light-load conditions. If abnormal temperature rise, leakage, vibration and noise are detected in advance during running-in, the machine should be shut down for inspection. NYP high-viscosity pump is a new type of high-volume positive displacement pump developed according to the needs of the petroleum, chemical, grease, medicine, dye, paint and food industries. Because of its wide selection of materials and unique structure , So widely used in different nature, different viscosity of the medium transport. Pump is mainly inside and outside the rotor, shaft, pump body, front cover, bracket, seal, bearings and other components. Sealing a mechanical seal and packing seal in two forms, for high temperature, high viscosity and corrosive media, the choice of packing seal. When conveying the easily-crystallized material, the jacket and the pump body can be designed with a heat-preservation jacket, which can be melted by steam during work. From the spindle outstretched to pump clockwise rotation. NYP series of high viscosity pump for medium temperature: -10 ℃ -200 ℃. NYP series of high viscosity pump for medium viscosity: 1.0cSt-300,000cSt. NYP high viscosity pump advantages: 1. The delivery of liquid smooth, pulsation, vibration, low noise. 2. There is a strong self-priming performance. 3. Proper selection of parts materials, can transport a variety of corrosive media, the use of temperature up to 200 ℃. 4. Internal and external rotor to the same, wear small, long service life. Pump speed and flow rate is a linear function of the appropriate changes in speed to change the pump flow.