High-pressure pump maintenance methods

In order to extend the service life of high-pressure pump to ensure that the pump can be used at any time, then in the usual pump maintenance work is very important, then in peacetime how to maintain the pump? The following is about high-pressure pump maintenance methods introduced. Maintenance of high-pressure pump 1, the new pump or overhaul the factory pump, the first oil change for 500 hours, after every 3000 hours of operation or change the quality of lubricating oil, high pressure pump overhaul cycle is tentatively scheduled for 12,000 hours . 2, power end of the injection of oil as required. 3, regular inspection and calibration Relief valve release pressure of 1.08 to 1.1 times the rated working pressure, and to regularly check the accuracy of the pressure gauge and belt tightness, timely replacement of damaged consumable parts. 4, adjust the various parts of the gap, check and tighten the screws. 5, the need to long-term deactivation of the pump (especially the sewage pump), the application of water rinse, drain the body of the liquid, all the valve washable anti-sewn oil, and the entire pump corrosion protection. 6, to enable the parking for a long time pump, pump should be fully inspected and maintained, otherwise it can not be enabled. The above is the high-pressure pump maintenance methods, these are for your reference only. Read more: China Building Water Exhibition Pump Valve Tube Fittings Exhibition Water Expo Xiamen Maritime Exhibition Internet + Forum Yiwu Expo Industry Interconnection (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http://beng.liuti.cn/ (service hotline:)