Blocked hydraulic filter causes problems with booster pump

November 06, 2024

Car booster pump problems, through a comprehensive visual inspection found that no leakage of hydraulic piping, pump body and the direction of the phenomenon, the hydraulic fluid in the tank between the upper and lower limits, the drive belt tight and moderate, but the hydraulic oil was black There is a deterioration of the phenomenon. In the observation of oil surface, in addition to the hydraulic oil was found to be too dirty, it is also found in the flow of hydraulic fluid bubbles from time to time emerge level. Could it be because of bubbles with hydraulic oil flow into the pump, squeezed in the pump and produce aerodynamic noise? Dirty hydraulic oil will filter plug, filter plugged, will make both sides of the filter pressure is too large, so the oil will be in an unstable state. In the case of changes in oil surface, due to the negative side is too negative, it is easy to make the air into the pipe, spread to the pump is compressed to produce aerodynamic noise. Replace a steering booster pump filter, and the steering hydraulic system to thoroughly clean, put on the pure standard hydraulic oil, the test found that failure completely ruled out. Not only the filter plug will produce noise, if the filter is damaged or displaced will produce aerodynamic noise. This is because the filter cartridge has two functions: one is to filter the sediment and impurities in the system, the other is to eliminate the pulsation when the pressure in the oil return port is too high, so as to prevent air bubbles from being generated and make the oil surface calm.

お問い合わせ

Author:

Ms. Alice

Eメール:

info@dyhydr.com

Phone/WhatsApp:

+8617616058688

人気商品

企業ニュース